For expansive fresh flower arrangements, arrangements with heavy flowers and flowers with thick or hard stems (proteas, strelizia, etc.).Pay attention to correct watering:The container for watering should be clean and high enough. Always place the OASIS® Floral Foam on the water and allow it to soak itself. Never press it under water, roll it around in the water or water it from above!Add FloraLife® flower freshener to the water before watering.

For smaller fresh flower arrangements with thin-stemmed or soft-stemmed flowers (e.g. Convallaria, muscari, hyacinths, etc.)Make sure to water properly:The container for watering should be clean and high enough. Always place the OASIS® Floral Foam on the water and allow it to soak itself. Never press it under water, roll it in water or water it from above! Before watering, add FloraLife® flower freshener to the water.

Pay attention to correct watering:The container for watering should be clean and high enough. Always place the OASIS® Floral Foam on top of the water and allow it to soak in by itself. Never press it under water, roll it in water or water it from above! Before watering, add FloraLife® flower freshener to the water.

Universally applicable.Pay attention to correct watering:The container for watering should be clean and high enough. Always place the OASIS® Floral Foam on the water and allow it to soak in by itself. Never press it under water, roll it in water or water it from above! Before watering, add FloraLife® flower freshener to the water.

Suitable for all occasions. Ideal for a very natural look!In addition, the brown shade can be used well as a contrast. Its depth effect is comparable to the OASIS® BLACK products!Pay attention to correct watering:The container for watering should be clean and high enough. Always place the OASIS® Floral Foam on the water and allow it to soak itself. Never press it under water, roll it in water or water it from above! Before watering, add FloraLife® flower freshener to the water.

After cutting, the products should be placed upright for a certain period of time so that the water displaced by the flower stems can run off.

The interior of the ring can be used as a base for an urn or but can be filled with plants or gravel, for example.

Ideal base for flower arrangements for Mother's Day or Valentine's Day or as car decorations at weddings. But heart shapes are also increasingly being used in funeral floristry. The hard foam base gives the heart stability and can easily be covered with greenery and tendrils. Using the OASIS® DECO-FIX vacuum suction cup, the hearts can be attached to the hood quickly and easily.TIP: Thanks to the smooth side walls of the hard foam base, it can easily be covered with greenery, covered with decorative material or sprayed with OASIS® Easy Color paint spray.

Plastic bowl complete with OASIS® Fresh Floral Foam. The large water reservoir means that the floral decorations can be pre-worked without hesitation.TIP: To ensure a reliable supply of water to the cut flowers, the flower stems should be inserted as deeply as possible into the Floral Foam. At the same time, the water supply in the plastic tray should be filled as high as possible.

Plastic bowl complete with OASIS® Fresh Floral Foam. The large water reservoir means that the floral decorations can be pre-worked without hesitation.TIP: To ensure a reliable supply of water to the cut flowers, the flower stems should be inserted as deeply as possible into the Floral Foam. At the same time, the water supply in the plastic tray should be filled as high as possible.

Plastic bowl complete with OASIS® Fresh Floral Foam. The large water reservoir means that the floral decorations can be pre-worked without hesitation.TIP: To ensure a reliable supply of water to the cut flowers, the flower stems should be inserted as deeply as possible into the Floral Foam. At the same time, the water supply in the plastic tray should be filled as high as possible.

Optimal for funeral floristry as a base for unusual urn decorations. As the ring is not completely closed, the front of the urn remains visible and is not covered by the floral arrangement.

Optimally suited as a base for funeral floristry, especially for square urns. Also ideal for modern and stylish Advent wreaths. Thanks to the closed wooden base various accessories can be placed on the inner surface depending on the occasion (e.g. Christmas decorations or a bottle of champagne as a beautiful floral birthday present).

For table and room decorations. If necessary, the foam can be attached to the floor using waterproof adhesive tape (e.g. Anchor Tape).The base is robust and hard-wearing, giving the cut foam a secure hold.

For table and room decorations. If necessary, the foam can be attached to the floor using waterproof adhesive tape (e.g. Anchor Tape).The base is robust and hard-wearing, giving the cut foam a secure hold.

For table and room decorations. If necessary, the foam can be attached to the floor using waterproof adhesive tape (e.g. Anchor Tape).The base is robust and hard-wearing, giving the cut foam a secure hold.

Since the foam does not need to be covered, a very special look is achieved with little floral material

For wedding floristry.The plastic grid gives the flowers good support. Long stems should be additionally supported and anchored to the plastic grid with wire. When cutting, make sure that the ends of the flower stems are far enough into the OASIS® Floral Foam for optimum water supply. The finished bridal bouquet will last longer if it is sprayed with OASIS® Clear Life to reduce evaporation.

For wedding floristry.The plastic grid gives the flowers good support. Long stems should be additionally supported and anchored to the plastic grid with wire. When cutting, make sure that the ends of the flower stems are far enough into the OASIS® Floral Foam for optimum water supply. The finished bridal bouquet will last longer if it is sprayed with FloraLife® Finishing Touch to reduce evaporation.

For wedding floristry. The plastic grid gives the flowers good support. Long stems should be additionally supported and anchored to the plastic grid with wire. When cutting, make sure that the ends of the flower stems are far enough into the Floral Foam for optimal water supply.The finished bridal bouquet will last longer if it is sprayed with FloraLife® Finishing Touch to reduce evaporation.

For wedding floristry.The plastic grid gives the flowers good support. Long stems should be additionally supported and anchored to the plastic grid with wire. When cutting, make sure that the ends of the flower stems are far enough into the OASIS® Floral Foam for optimum water supply. The finished bridal bouquet will last longer if it is sprayed with FloraLife® Finishing Touch to reduce evaporation.

For wedding floristry.Due to the angled handle, mainly suitable for flowing bridal bouquets. The plastic grid gives the flowers good support. Long stems should be additionally supported and anchored to the plastic grid with wire. When inserting, make sure that the ends of the flower stems are far enough into the OASIS® Floral Foam for optimum water supply.The finished bridal bouquet will last longer if it is sprayed with FloraLife® Finishing Touch to reduce evaporation.

Ideal as a car decoration holder for wedding floristry, but also suitable as a base for window, door or mirror decorations. The all-round grid gives the flowers additional support.Thanks to its lateral connection options, several OASIS® Auto-Corso can be connected to each other.After you have attached the OASIS® Auto-Corso, please clean and dry the suction surface of the vacuum cup and the base provided for it. This must be clean, dry and free of grease, otherwise the holding power of the vacuum cup cannot be guaranteed.When using as a car decoration, please note that freshly polished car paint can also reduce the holding power of the vacuum cup. In this case, the polish should be carefully removed from the corresponding area with warm water, detergent and a lint-free cloth (leather cloth).Fixing on the intended base:Place the OASIS® Auto-Corso on the base and activate the vacuum suction cup by pulling the two pull handles outwards at the same time.Removing from the carpet pad:By simultaneously pressing the vacuum cup's pull handles inwards, you automatically release the connection to the carpet pad. If the suction cup does not release immediately, lift the suction surface of the vacuum cup slightly at the edge with your fingertip and allow the air to flow into the remaining vacuum. This way, the OASIS® Auto-Corso can be lifted off in any case.

Ideal as a car decoration holder for wedding floristry, but also suitable as a base for window, door or mirror decorations. The all-round grid gives the flowers additional support.After you have fitted the OASIS® Auto-Corso Mini, please clean and dry the suction surface of the vacuum cup and the base provided for it. This must be clean, dry and free of grease, otherwise the holding power of the vacuum cup cannot be guaranteed.When using as a car decoration, it should be noted that freshly polished car paint can also reduce the holding power of the vacuum cup. In this case, the polish should be carefully removed from the relevant area with warm water, detergent and a lint-free cloth (leather cloth).Fix to the intended surface. Place the OASIS® Auto-Corso Mini on the base and activate the vacuum suction cup by pulling the two pull handles outwards at the same time.Removing from the baseBy pressing the pull handles of the vacuum cup inwards at the same time, you automatically release the connection to the base. If the suction cup does not release immediately, lift the suction surface of the vacuum cup slightly at the edge with your fingertip and allow the air to flow into the remaining vacuum. This way, the OASIS® Auto-Corso Mini can be lifted off in any case.